diff --git a/Misc/Portable.h b/Misc/Portable.h
index 12cae0a..d1721dd 100644
--- a/Misc/Portable.h
+++ b/Misc/Portable.h
@@ -166,22 +166,22 @@ struct link_state_notify_t
 #endif
 
 #if defined(LINUX) || defined(BSD) || defined(SUNOS)
-#define WORKDIR            "/var/lib/dibbler"
+#define WORKDIR            "__PREFIX__/var/lib/dibbler"
 #define DEFAULT_SCRIPT     ""
-#define CLNTCONF_FILE      "/etc/dibbler/client.conf"
-#define SRVCONF_FILE       "/etc/dibbler/server.conf"
-#define RELCONF_FILE       "/etc/dibbler/relay.conf"
+#define CLNTCONF_FILE      "__PREFIX__/etc/dibbler/client.conf"
+#define SRVCONF_FILE       "__PREFIX__/etc/dibbler/server.conf"
+#define RELCONF_FILE       "__PREFIX__/etc/dibbler/relay.conf"
 #define RESOLVCONF_FILE    "/etc/resolv.conf"
 #define NTPCONF_FILE       "/etc/ntp.conf"
-#define RADVD_FILE         "/etc/dibbler/radvd.conf"
-#define CLNTPID_FILE       "/var/lib/dibbler/client.pid"
-#define SRVPID_FILE        "/var/lib/dibbler/server.pid"
-#define RELPID_FILE        "/var/lib/dibbler/relay.pid"
-#define CLNTLOG_FILE       "/var/log/dibbler/dibbler-client.log"
-#define SRVLOG_FILE        "/var/log/dibbler/dibbler-server.log"
-#define RELLOG_FILE        "/var/log/dibbler/dibbler-relay.log"
-#define CLNT_AAASPI_FILE   "/var/lib/dibbler/AAA/AAA-SPI"
-#define SRV_KEYMAP_FILE    "/var/lib/dibbler/AAA/keys-mapping"
+#define RADVD_FILE         "__PREFIX__/etc/dibbler/radvd.conf"
+#define CLNTPID_FILE       "__PREFIX__/var/lib/dibbler/client.pid"
+#define SRVPID_FILE        "__PREFIX__/var/lib/dibbler/server.pid"
+#define RELPID_FILE        "__PREFIX__/var/lib/dibbler/relay.pid"
+#define CLNTLOG_FILE       "__PREFIX__/var/log/dibbler/dibbler-client.log"
+#define SRVLOG_FILE        "__PREFIX__/var/log/dibbler/dibbler-server.log"
+#define RELLOG_FILE        "__PREFIX__/var/log/dibbler/dibbler-relay.log"
+#define CLNT_AAASPI_FILE   "__PREFIX__/var/lib/dibbler/AAA/AAA-SPI"
+#define SRV_KEYMAP_FILE    "__PREFIX__/var/lib/dibbler/AAA/keys-mapping"
 #define NULLFILE           "/dev/null"
 
 /* those defines were initially used on Linux only, but hopefully 
diff --git a/Port-bsd/lowlevel-bsd.c b/Port-bsd/lowlevel-bsd.c
index ede2626..04056a1 100644
--- a/Port-bsd/lowlevel-bsd.c
+++ b/Port-bsd/lowlevel-bsd.c
@@ -488,10 +488,10 @@ int is_addr_tentative(char * ifacename, int iface, char * addr) {
 char * getAAAKeyFilename(uint32_t SPI) {
     static char filename[1024];
     if (SPI != 0)
-        snprintf(filename, 1024, "%s%s%x", "/var/lib/dibbler/AAA/", "AAA-key-",
+        snprintf(filename, 1024, "%s%s%x", WORKDIR "/AAA/", "AAA-key-",
             SPI);
     else
-        strcpy(filename, "/var/lib/dibbler/AAA/AAA-key");
+        strcpy(filename, WORKDIR "/AAA/AAA-key");
     return filename;
 }
 
diff --git a/doc/examples/client.conf b/doc/examples/client.conf
index 86370d9..d54445a 100644
--- a/doc/examples/client.conf
+++ b/doc/examples/client.conf
@@ -21,7 +21,7 @@ log-mode short
 log-level 7
 
 # Uncomment this line to run script every time response is received
-# script "/var/lib/dibbler/client-notify.sh"
+# script "__PREFIX__/var/lib/dibbler/client-notify.sh"
 
 
 # Current Dibbler release adds obtained addresses with /64 prefix. Although
diff --git a/doc/examples/server.conf b/doc/examples/server.conf
index 402865c..6862a5e 100644
--- a/doc/examples/server.conf
+++ b/doc/examples/server.conf
@@ -12,7 +12,7 @@ log-level 8
 log-mode short
 
 # Uncomment this line to call script every time a response is sent
-#script "/var/lib/dibbler/server-notify.sh"
+#script "__PREFIX__/var/lib/dibbler/server-notify.sh"
 
 # set preference of this server to 0 (higher = more prefered)
 preference 0
diff --git a/doc/man/dibbler-client.8 b/doc/man/dibbler-client.8
index 953e701..fcd4793 100644
--- a/doc/man/dibbler-client.8
+++ b/doc/man/dibbler-client.8
@@ -76,8 +76,8 @@ iface eth0
 More examples can be found in the User's Guide.
 
 .SH FILES
-All files are created in the /var/lib/dibbler directory. Dibbler
-client reads /var/lib/dibbler/client.conf file. During operation,
+All files are created in the __PREFIX__/var/lib/dibbler directory. Dibbler
+client reads __PREFIX__/var/lib/dibbler/client.conf file. During operation,
 Dibbler saves various file in that directory. After reception of the
 DNS servers or domain informations, they are added to the
 /etc/resolv.conf file. After shutdown, that information is removed
diff --git a/doc/man/dibbler-relay.8 b/doc/man/dibbler-relay.8
index 6767e02..07283ea 100644
--- a/doc/man/dibbler-relay.8
+++ b/doc/man/dibbler-relay.8
@@ -93,9 +93,9 @@ iface eth3 {
 .fi
 
 .SH FILES
-All files are created in the /var/lib/dibbler directory. During operation,
+All files are created in the __PREFIX__/var/lib/dibbler directory. During operation,
 Dibbler saves various file in that directory. Dibbler relay reads
-/etc/dibbler/relay.conf file. Log file is named client.log.
+__PREFIX__/etc/dibbler/relay.conf file. Log file is named client.log.
 
 .SH STANDARDS
 This implementation aims at conformance to the following standards:
diff --git a/doc/man/dibbler-server.8 b/doc/man/dibbler-server.8
index bca5dad..9494c42 100644
--- a/doc/man/dibbler-server.8
+++ b/doc/man/dibbler-server.8
@@ -79,8 +79,8 @@ iface eth0 {
 More examples can be found in the User's Guide.
 
 .SH FILES
-All files are created in the /var/lib/dibbler directory. Dibbler
-server reads /var/lib/dibbler/server.conf file. During operation,
+All files are created in the __PREFIX__/var/lib/dibbler directory. Dibbler
+server reads __PREFIX__/var/lib/dibbler/server.conf file. During operation,
 Dibbler saves various file in that directory.  Log file is named client.log.
 
 .SH STANDARDS
diff --git a/scripts/notify-scripts/server-notify.sh b/scripts/notify-scripts/server-notify.sh
index 3b4adbf..5661c6e 100755
--- a/scripts/notify-scripts/server-notify.sh
+++ b/scripts/notify-scripts/server-notify.sh
@@ -6,7 +6,7 @@
 #
 # Many parameters will be passed as environment variables
 
-LOGFILE=/var/lib/dibbler/server-notify.log
+LOGFILE=__PREFIX__/var/lib/dibbler/server-notify.log
 
 echo "---$1--------" >> $LOGFILE
 date >> $LOGFILE